Toyota CH-R Service Manual: On-vehicle Inspection

Toyota CH-R Service Manual / K114 Cvt / Shift Lever / On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. SECURE VEHICLE

(a) Fully apply the parking brake and chock a wheel.

CAUTION:

  • Make sure to apply the parking brake and chock a wheel before performing this procedure.
  • If the vehicle is not secure and the shift lever is moved to N, the vehicle may suddenly move, possibly resulting in an accident or serious injury.

2. INSPECT SHIFT LEVER POSITION

(a) When moving the shift lever from P to each position with the ignition switch ON and the brake pedal depressed, check that the shift lever moves smoothly and correctly into position.

(b) Start the engine and check that the vehicle moves forward when the shift lever is moved from N to D and moves rearward when the shift lever is moved to R.

If the operation is not as specified, inspect the park/neutral position switch and shift lever assembly.

3. INSPECT SHIFT LOCK OPERATION

(a) Move the shift lever to P.

(b) Turn the ignition switch off.

(c) Check that the shift lever cannot be moved from P to any other position.

(d) Turn the ignition switch to ON, depress the brake pedal, and check that the shift lever can be moved to another position.

If the operation is not as specified, inspect the shift lever assembly.

4. INSPECT SHIFT LOCK RELEASE BUTTON OPERATION

(a) Move the shift lever to P.

(b) Turn the ignition switch off.

(c) Remove the shift lever cap.

(d) When moving the shift lever with the shift lock release button pressed, check that the shift lever can be moved from P to any other position.

If the operation is not as specified, inspect the shift lever assembly.

(e) Install the shift lever cap.

5. INSPECT KEY INTERLOCK OPERATION (w/o Smart Key System)

(a) Turn the ignition switch to ON.

(b) Depress the brake pedal and move the shift lever to any position other than P.

(c) Check that the ignition key cannot be turned to LOCK.

(d) Move the shift lever to P, turn the ignition key to LOCK and check that the ignition key can be removed.

If the operation is not as specified, inspect the shift lever assembly.

    Components
    COMPONENTS ILLUSTRATION *1 FLOOR SHIFT SHIFT LEVER ASSEMBLY *2 NO. 1 CONSOLE BOX MOUNTING BRACKET *3 SHIFT LEVER CAP ...

    Removal
    REMOVAL PROCEDURE 1. SECURE VEHICLE (a) Fully apply the parking brake and chock a wheel. CAUTION: Make sure to apply the parking brake and chock a wheel before p ...

    Other materials:

    Toyota CH-R Service Manual > Rear Door Courtesy Switch: Installation
    INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the LH and RH sides. The procedure described below is for the LH side. PROCEDURE 1. INSTALL REAR DOOR COURTESY LIGHT SWITCH ASSEMBLY (a) Using a T30 "TORX" socket wrench, install the rear door cou ...

    Toyota CH-R Service Manual > Washer Motor: Inspection
    INSPECTION PROCEDURE 1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY (for Front Side) HINT: This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly. (a) Fill the windshield washer jar assembly with washer fluid. ...

    © 2017-2020 Copyright www.tochr.net
    0.0149