PROCEDURE
|
1. |
CHECK DISPLAY SETTING |
(a) Check that the display is not in screen off mode.
OK:
The display setting is not in screen off mode.
| NG | |
CHANGE SCREEN TO SCREEN ON MODE |
|
|
2. |
CHECK IMAGE QUALITY SETTING |
(a) Check that the screen color quality can be set.
OK:
Setting is possible.
| OK | |
SET SCREEN COLOR QUALITY TO NORMAL |
| NG | |
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
USB Audio System Recognition/Play Error
Vehicle Speed Signal Circuit between Radio Receiver and Combination MeterToyota CH-R Service Manual > Power Steering System: TC and CG Terminal Circuit
DESCRIPTION
Connecting terminals TC and CG of the DLC3 causes the ECU to display DTCs by
blinking the EPS warning light.
WIRING DIAGRAM
CAUTION / NOTICE / HINT
NOTICE:
If the power steering ECU assembly has been replaced, perform assist map writing
and torque sensor zero point calibration ...
Toyota CH-R Service Manual > Power Window Control System: Auto Up Operation does not Fully Close Power Window (Jam Protection Function
is Activated)
DESCRIPTION
If a door glass does not slide smoothly or a power window regulator motor assembly
or door window regulator sub-assembly does not operate smoothly, the jam protection
function may be triggered automatically, resulting in the auto up operation being
unable to fully close the power ...