CAUTION / NOTICE / HINT
HINT:
Some versions of "Bluetooth" compatible audio players may not function properly, or the functions may be limited using the radio and display receiver assembly, even if the portable audio player itself can play files.
Click here
PROCEDURE
|
1. |
CHECK THAT PORTABLE PLAYER IS "Bluetooth" AUDIO COMPATIBLE |
(a) Check if the portable player is "Bluetooth" audio compatible.
|
Result |
Proceed to |
|---|---|
|
The portable player is "Bluetooth" audio compatible. |
A |
|
The portable player is not "Bluetooth" audio compatible. |
B |
| B | |
USE A "Bluetooth" AUDIO COMPATIBLE PORTABLE PLAYER |
|
|
2. |
CHECK CONNECTION PROCEDURE OF CONNECTED DEVICE |
(a) Referring to Owner's Manual, correctly register the portable player.
(b) Check that the portable player has been registered as a connected device.
HINT:
The portable player cannot be registered under any of the following conditions:
OK:
The portable player has been registered as a connected device.
| OK | |
END |
|
|
3. |
CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL |
(a) Check if the portable player can be registered normally to another "Bluetooth" audio compatible vehicle of the same model.
OK:
The portable player can be registered.
| NG | |
MALFUNCTION IN PORTABLE PLAYER |
|
|
4. |
REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES |
(a) Remove additional devices which use radio waves.
(b) Place the portable player close to the radio and display receiver assembly.
(c) Check that the portable player can be registered as a connected device.
OK:
The portable player can be registered.
| OK | |
END |
| NG | |
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
Registered Device cannot be Deleted
USB Audio System Recognition/Play ErrorToyota CH-R Service Manual > Power Window Regulator Motor(for Rear Door): Components
COMPONENTS
ILLUSTRATION
*1
REAR DOOR BELT REAR SEAL
*2
REAR DOOR BELT SEAL
*3
REAR DOOR GLASS INNER WEATHERSTRIP
*4
REAR DOOR INSIDE HANDLE BEZEL PLUG
*5
REAR DOOR REAR FRAME ...
Toyota CH-R Service Manual > Roof Headlining: Disassembly
DISASSEMBLY
PROCEDURE
1. REMOVE ROOF HEADLINING FORMING PAD (except Cold Area)
(a) Remove the 2 roof headlining forming pads.
2. REMOVE NO. 1 ROOF SILENCER PAD
(a) Remove the No. 1 roof silencer pad.
3. REMOVE NO. 2 ROOF SILENCER PAD
(a) Remove the 2 No. 2 roof silencer pads.
4. REMOVE ...