Toyota CH-R Service Manual: Black Screen

Toyota CH-R Service Manual / Audio / Video / Audio And Visual System(for Radio And Display Type) / Black Screen

PROCEDURE

1.

CHECK DISPLAY SETTING

(a) Check that the display is not in screen off mode.

OK:

The display setting is not in screen off mode.

NG

CHANGE SCREEN TO SCREEN ON MODE
OK

2.

CHECK IMAGE QUALITY SETTING

(a) Check that the screen color quality can be set.

OK:

Setting is possible.

OK

SET SCREEN COLOR QUALITY TO NORMAL
NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    USB Audio System Recognition/Play Error
    DESCRIPTION When a USB device or "iPod" is connected to the USB jack of the No. 1 stereo jack adapter assembly, it must have playable files. The device must also communicate with and be ...

    Vehicle Speed Signal Circuit between Radio Receiver and Combination Meter
    DESCRIPTION for Automatic Sound Levelizer (ASL): This circuit is necessary for the Automatic Sound Levelizer (ASL) built into the radio and display receiver assembly. The Automatic So ...

    Other materials:

    Toyota CH-R Service Manual > Blind Spot Monitor System: Operation Check
    OPERATION CHECK HINT: The blind spot monitor beam axis confirmation is performed to confirm whether the sensor's beam axis is correct, and perform adjustment of the beam axis by using reflector. BLIND SPOT MONITOR BEAM AXIS CONFIRMATION (a) When performing the blind spot monitor beam axi ...

    Toyota CH-R Service Manual > Pre-collision System: Terminals Of Ecu
    TERMINALS OF ECU CHECK MILLIMETER WAVE RADAR SENSOR (a) Measure the voltage and resistance according to the value(s) in the table below. HINT: If the result is not as specified, there may be a malfunction on the wire harness side. Terminal No. (Symbol) Wiring Color ...

    Toyota C-HR (AX20) 2023-2026 Owner's Manual

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2026 Copyright www.tochr.net
    0.0109