Toyota CH-R Service Manual: Noise Occurs or Sound Skips when Portable Player Plays

Toyota CH-R Service Manual / Audio / Video / Audio And Visual System(for Radio Receiver Type) / Noise Occurs or Sound Skips when Portable Player Plays

CAUTION / NOTICE / HINT

HINT:

  • Perform this check with the portable player volume set at an appropriate level.
  • Make sure that there are no obstructions between the portable player and radio receiver assembly that may block signals, and that the portable player and radio receiver assembly are not excessively far apart.
  • Make sure that devices other than the radio receiver assembly are not connected to the portable player.
  • Make sure that there is no interference from a wireless LAN, etc.

PROCEDURE

1.

CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL

(a) Check that the same problem does not occur in the sound heard from the speakers of another "Bluetooth" audio compatible vehicle of the same model.

OK:

The same problem does not occur in the sound heard from the speakers.

NG

MALFUNCTION IN PORTABLE PLAYER

OK

2.

REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES

(a) Remove additional devices which use radio waves.

(b) Play the portable player and check that the same problem does not occur in the sound heard from the speakers.

OK:

The same problem does not occur in the sound heard from the speakers.

OK

END

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Portable Player cannot be Operated Using In-vehicle Device or Track Information is not Displayed on In-vehicle Device
    PROCEDURE 1. CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL (a) Check if track information is displayed normally on another "Bl ...

    Portable Player cannot be Connected Manually/Automatically
    CAUTION / NOTICE / HINT HINT: Some versions of "Bluetooth" compatible audio players may not function properly, or the functions may be limited using the radio receiver assembly, even if ...

    Other materials:

    Toyota CH-R Service Manual > Oil Pan: Installation
    INSTALLATION PROCEDURE 1. INSTALL OIL CLEANER (CVT) MAGNET (a) Install the 2 oil cleaner (CVT) magnets to the transaxle oil (CVT) pan sub-assembly. *1 Oil Cleaner (CVT) Magnet ...

    Toyota CH-R Service Manual > Continuously Variable Transaxle System: Transmission Fluid Pressure Sensor/Switch "A" Circuit Range/Performance (P0841,P2829)
    DESCRIPTION The ECM controls the secondary oil pressure based on the secondary oil pressure signal output by the oil pressure sensor. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory P0841 ...

    © 2017-2020 Copyright www.tochr.net
    0.0248