Toyota CH-R Service Manual: Poor Sound Quality in All Modes (Low Volume)

PROCEDURE

1.

CHECK AUDIO SETTINGS

(a) Set bass, mid-range and treble to the initial values and check that the sound is normal.

OK:

The sound returns to normal.

OK

END

NG

2.

COMPARE WITH ANOTHER VEHICLE OF SAME MODEL

(a) Compare with another vehicle of the same model which does not have trouble to see if there is any difference in the sound quality.

OK:

No difference is found.

OK

END

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Panel Switches do not Function
    PROCEDURE 1. CHECK PANEL SWITCH (a) Check for foreign matter around the switches that might prevent operation. OK: No foreign matter is found. OK ...

    Cellular Phone Registration Failure
    CAUTION / NOTICE / HINT HINT: If the operation of a cellular phone or the radio receiver assembly is requested, make sure to follow the instructions closely and perform the operation. PROCEDURE ...

    Other materials:

    Toyota CH-R Service Manual > Washer Motor: Inspection
    INSPECTION PROCEDURE 1. INSPECT WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY (for Front Side) HINT: This check should be performed with the windshield washer motor and pump assembly installed to the windshield washer jar assembly. (a) Fill the windshield washer jar assembly with washer fluid. ...

    Toyota CH-R Service Manual > Airbag System: Short in Driver Side Squib 2nd Step Circuit (B1810/53-B1813/53)
    DESCRIPTION The driver side squib 2nd step circuit consists of the airbag sensor assembly, spiral cable with sensor sub-assembly and horn button assembly. The airbag sensor assembly uses this circuit to deploy the airbag when deployment conditions are met. These DTCs are stored when a malfunc ...

    © 2017-2020 Copyright www.tochr.net
    0.0235