CUSTOMIZE PARAMETERS
CUSTOMIZE THEFT DETERRENT SYSTEM
NOTICE:
HINT:
The following items can be customized.
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the ignition switch to ON.
(3) Turn the Techstream on.
(4) Enter the following menus: Customize Setting / Security or Wireless Door Lock.
(5) Select the setting by referring to the table below.
Security
Tester Display |
Description |
Default |
Setting |
ECU |
---|---|---|---|---|
Security control with mechanism key |
This function makes it possible to cancel the security alarm with the mechanical key. |
OFF |
0:OFF,1:ON |
Main body ECU (Multiplex network body ECU) |
Toyota CH-R Service Manual > Seat Heater System: Seat Heater for Front Left Seat does not Operate
DESCRIPTION
When the seat heater switch on air conditioning control assembly is operated,
the seat heater control sub-assembly LH receives the signal. The seat heater control
sub-assembly LH receives the signal and operates the front seat heater.
WIRING DIAGRAM
for TMC Made
for TMMT Made
...
Toyota CH-R Service Manual > Airbag System: TC and CG Terminal Circuit
DESCRIPTION
DTC output mode is set by connecting terminals TC and CG of the DLC3.
DTCs are displayed by blinking of the SRS warning light.
HINT:
When multiple warning lights in the combination meter blink continuously,
a short to ground in the wiring or an ECU connected to terminal T ...