Toyota CH-R Service Manual: Precaution

PRECAUTION

PRECAUTIONS WHEN USING TECHSTREAM

(a) After all DTCs are cleared, check if the malfunction occurs again 6 seconds after turning the ignition switch ON.

PRECAUTIONS FOR THE KEY

(a) The key is a precision instrument. Be sure to observe the following:

(1) Do not drop or strike the key.

(2) Do not allow the key to be kept in a high temperature place for a long time.

(3) Do not use an ultrasonic washing machine to clean the key.

(4) Keep the key away from magnets or magnetized items during use.

(5) Do not attach any stickers to the key.

PRECAUTION FOR REGISTRATION

(a) If replacing any of the following parts, refer to Registration.

NOTICE:

Any keys or ECUs for which registration has been performed cannot be reused.

(1) Key

(2) Transponder key ECU assembly

(3) ECM

    Parts Location
    PARTS LOCATION ILLUSTRATION *1 ECM *2 NO. 1 ENGINE ROOM RELAY BLOCK ILLUSTRATION *1 UNLOCK WARNING SWITCH ASSEMBLY ...

    System Diagram
    SYSTEM DIAGRAM ...

    Other materials:

    Toyota CH-R Service Manual > Front Speed Sensor: Installation
    INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. The front speed sensor rotor is a component of the front axle hub sub-assembly. If the front speed sensor rotor is malfunctioning, replace ...

    Toyota CH-R Service Manual > Blind Spot Monitor System: Master Module Horizontal Axis Misalignment (C1AC1)
    DESCRIPTION This DTC is stored when the angle of the blind spot monitor sensor LH (Master) deviates more than the allowable range from the horizontal axis. HINT: If a drum tester such as a speedometer tester, brake/speedometer combination tester or chassis dynamometer is used with t ...

    Toyota C-HR (AX20) 2023-2026 Owner's Manual

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2026 Copyright www.tochr.net
    0.0064