Toyota CH-R Service Manual: Components

COMPONENTS

ILLUSTRATION

*A

for TMMT Made

*B

for TMC Made

*1

INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY

*2

INSTRUMENT PANEL LOWER CENTER FINISH PANEL

*3

LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY WITH DOOR

*4

LOWER NO. 1 INSTRUMENT PANEL AIRBAG DOOR

*5

LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

-

-

Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf)

-

-

    Knee Airbag Assembly
    ...

    On-vehicle Inspection
    ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: Be sure to correctly follow the removal and installation procedures for the lower No. 1 instrument panel airbag assembly. PROCEDURE 1. INS ...

    Other materials:

    Toyota CH-R Service Manual > Can Communication System: Check Bus 4 Line for Short to GND
    DESCRIPTION There may be a short circuit between one of the CAN bus lines and GND when there is no resistance between terminal 22 (CA2H) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3, or terminal 7 (CA2L) of the central gateway ECU (network gateway ECU) and ...

    Toyota CH-R Service Manual > Rear Brake(for Tmc Made): Reassembly
    REASSEMBLY PROCEDURE 1. TEMPORARILY TIGHTEN REAR DISC BRAKE BLEEDER PLUG (a) Temporarily install the rear disc brake bleeder plug to the rear disc brake cylinder assembly. HINT: Fully tighten the rear disc brake bleeder plug after bleeding the system. 2. INSTALL REAR DISC BRAKE BLEEDER PLUG ...

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2024 Copyright www.tochr.net
    0.016