DESCRIPTION
The airbag sensor assembly sends/receives signals to/from each ECU via CAN communication.
|
DTC No. |
Detection Item |
DTC Detection Condition |
Trouble Area |
Test Mode / Check Mode |
|---|---|---|---|---|
|
U0154/99 |
Lost Communication with Restraints Occupant Classification System Module |
CAN communication error between the airbag sensor assembly and occupant detection ECU (CAN communication system malfunction) |
CAN communication system |
Does not apply to test/check mode |
CAUTION / NOTICE / HINT
Refer to troubleshooting in CAN Communication System.
Click here
PROCEDURE
|
1. |
GO TO CAN COMMUNICATION SYSTEM |
(a) Go to CAN communication system.
Click here
| NEXT | |
END |
Front Airbag Sensor RH Malfunction (B1610/13)
Lost Communication with Front Airbag Sensor RH (B1612/83,B1613/83)Toyota CH-R Service Manual > Front Brake Flexible Hose: Installation
INSTALLATION
CAUTION / NOTICE / HINT
NOTICE:
Because the left and right front flexible hoses are not interchangeable,
verify the part number when installing the front flexible hoses.
When reusing the front flexible hoses, use the identification marks
created during removal to ...
Toyota CH-R Service Manual > Vehicle Stability Control System: Yaw Rate Sensor Malfunction (C1436)
DESCRIPTION
This DTC is stored when the skid control ECU (brake actuator assembly) detects
improper installation of the yaw rate and acceleration sensor (airbag sensor assembly)
or an abnormality in the difference between the yaw rate sensor value and the control
value estimated based on the ...