PRECAUTION
IGNITION SWITCH EXPRESSIONS
HINT:
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
Expression |
Ignition Switch (Position) |
Engine Switch (Condition) |
---|---|---|
Ignition Switch off |
LOCK |
Off (Lock) |
Ignition Switch ACC |
ACC |
On (ACC) |
Ignition Switch ON |
ON |
On (IG) |
Engine Start |
START |
On (Start) |
PRECAUTION WHEN REPLACING COMBINATION METER ASSEMBLY
When replacing the combination meter assembly, always replace it with a new one. If a combination meter assembly which was installed to another vehicle is used, the information stored in it will not match the information from the vehicle and a DTC may be stored.
Toyota CH-R Service Manual > Front Lower Ball Joint: Inspection
INSPECTION
PROCEDURE
1. INSPECT FRONT LOWER BALL JOINT ASSEMBLY
(a) Inspect the turning torque of the ball joint.
(1) Secure the front lower ball joint assembly in a vise using aluminum
plates.
(2) Install the nut to the front lower ball joint assembly stud.
(3) Using a to ...
Toyota CH-R Service Manual > Meter / Gauge System: Speedometer Malfunction
DESCRIPTION
The combination meter assembly receives vehicle speed signals from the skid control
ECU (brake actuator assembly) via CAN communication. The speed sensor detects the
wheel speed and sends the appropriate signals to the skid control ECU (brake actuator
assembly). The skid control E ...