OPERATION CHECK
CHECK PRE-COLLISION SYSTEM SETTING
(a) Turn the ignition switch to ON.
(b) Operate the steering pad switch assembly to change the setting of PCS on the multi-information display to "On" and check that the pre-collision system turns on.
HINT:
When the ignition switch is turned ON, the PCS will turn on. This can be changed through a customize setting using the Techstream.
*a |
PCS Warning Light |
(c) Operate the steering pad switch assembly to change the PCS setting to "Off" and check that the PCS warning light illuminates.
CHECK PRE-COLLISION SYSTEM SENSITIVITY SETTING
(a) Turn the ignition switch to ON.
(b) Operate the steering pad switch assembly to select Change PCS Sensitivity and check that the pre-collision system sensitivity setting displayed on the multi-information display changes between "Far", "Mid" and "Near" accordingly.
HINT:
Toyota CH-R Service Manual > Lighting (ext): License Plate Light Assembly
Components
COMPONENTS
ILLUSTRATION
*1
LICENSE PLATE LIGHT ASSEMBLY
-
-
Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
P ...
Toyota CH-R Service Manual > Heating / Air Conditioning: Ambient Temperature Sensor
Components
COMPONENTS
ILLUSTRATION
*1
THERMISTOR ASSEMBLY
-
-
Removal
REMOVAL
PROCEDURE
1. REMOVE FRONT BUMPER ASSEMBLY
Click here
2. REMOVE THERMISTOR ASSEMBLY
(a) Disconnect the connector.
...