REMOVAL
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. REMOVE FRONT WHEEL
Click here
2. DRAIN BRAKE FLUID
NOTICE:
If brake fluid leaks onto any painted surface, immediately wash it off.
3. REMOVE FRONT FLEXIBLE HOSE
|
(a) Remove the union bolt and gasket, and disconnect the front flexible hose from the front disc brake cylinder assembly. |
|
|
(b) Remove the bolt and separate the front flexible hose from the shock absorber assembly. |
|
|
(c) Using a union nut wrench, disconnect the brake tube while holding the front flexible hose with a wrench. NOTICE:
|
|
(d) Remove the clip and front flexible hose from the vehicle body.
Components
InstallationToyota CH-R Service Manual > Lighting (ext): Automatic High Beam Main Switch
Components
COMPONENTS
ILLUSTRATION
*1
AUTO HIGH BEAM SWITCH
*2
INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Removal
REMOVAL
PROCEDURE
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
Click here
2. REMOVE AUTO HIGH BEAM ...
Toyota CH-R Service Manual > Continuously Variable Transaxle System: Shift Solenoid "G" Control Circuit Low (Shift Solenoid Valve SC) (P099B,P099C)
DESCRIPTION
Based on the signal received by the shift solenoid valve SC, the ECM uses the
shift solenoid valve SLU to control the forward and reverse clutch pressure.
If there is an open or short in the shift solenoid valve SC circuit, the ECM
stops sending current to the defective shift solen ...