Toyota CH-R Service Manual: Dtc Check / Clear

DTC CHECK / CLEAR

DTC CHECK USING TECHSTREAM

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Air Conditioner / Trouble Codes.

Body Electrical > Air Conditioner > Trouble Codes

(e) Check for DTCs.

DTC CLEAR USING TECHSTREAM

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Air Conditioner / Trouble Codes.

Body Electrical > Air Conditioner > Clear DTCs

(e) Clear the DTCs.

    Data List / Active Test
    DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when decidi ...

    Diagnostic Trouble Code Chart
    DIAGNOSTIC TROUBLE CODE CHART AIR CONDITIONING SYSTEM DTC No. Detection Item DTC Detection Condition Link B1411 Room Temperatu ...

    Other materials:

    Toyota CH-R Service Manual > Roof Headlining: Disassembly
    DISASSEMBLY PROCEDURE 1. REMOVE ROOF HEADLINING FORMING PAD (except Cold Area) (a) Remove the 2 roof headlining forming pads. 2. REMOVE NO. 1 ROOF SILENCER PAD (a) Remove the No. 1 roof silencer pad. 3. REMOVE NO. 2 ROOF SILENCER PAD (a) Remove the 2 No. 2 roof silencer pads. 4. REMOVE ...

    Toyota CH-R Service Manual > Pre-collision System: Front Radar Sensor Incorrect Axial Gap (C1A11,C1A14)
    DESCRIPTION When the system determines that the vehicle is driving straight ahead based on signals from the yaw rate and acceleration sensor (airbag sensor assembly), etc., the millimeter wave radar sensor assembly performs self-diagnosis to check if the sensor beam axis is misaligned. C1A11 ...

    © 2017-2020 Copyright www.tochr.net
    0.0153