Toyota CH-R Service Manual: System Diagram

SYSTEM DIAGRAM

Wireless Door Lock Control System

Communication Table

Sender

Receiver

Signal

Line

Certification ECU

(Smart Key ECU Assembly)

Main Body ECU

(Multiplex Network Body ECU)

Wireless door lock/unlock signal

CAN

Main Body ECU

(Multiplex Network Body ECU)

Combination Meter Assembly

Wireless door lock hazard warning light request signal

CAN

    System Description
    SYSTEM DESCRIPTION WIRELESS DOOR LOCK CONTROL SYSTEM The wireless door lock control system can be used to lock and unlock all doors from a distance. The system is controlled by an electrical key t ...

    How To Proceed With Troubleshooting
    CAUTION / NOTICE / HINT HINT: The wireless door lock control system troubleshooting procedure is based on the premise that the power door lock control system is operating properly. C ...

    Other materials:

    Toyota CH-R Service Manual > Airbag System: Lost Communication with Restraints Occupant Classification System Module (U0154/99)
    DESCRIPTION The airbag sensor assembly sends/receives signals to/from each ECU via CAN communication. DTC No. Detection Item DTC Detection Condition Trouble Area Test Mode / Check Mode U0154/99 Lost Communication wi ...

    Toyota CH-R Service Manual > Can Communication System: Open in Bus 4 Main Bus Line
    DESCRIPTION There may be an open circuit in one of the CAN main bus lines when the resistance between terminals 22 (CA2H) and 7 (CA2L) of the central gateway ECU (network gateway ECU) is 70 Ω or higher. Symptom Trouble Area Resistance between terminals 2 ...

    © 2017-2021 Copyright www.tochr.net
    0.0218