Toyota CH-R Service Manual: Initialization

INITIALIZATION

BACK DOOR LOCK

(a) When the battery is reconnected:

If the back door is locked and therefore cannot be opened, it is necessary to unlock the back door using the door control switch, electrical key transmitter sub-assembly switch*1 or door control transmitter assembly*2.

  • *1: w/ Smart Key System
  • *2: w/o Smart Key System
    Operation Check
    OPERATION CHECK CHECK POWER DOOR LOCK OPERATION NOTICE: The operation check below is based on the non-customized initial condition of the vehicle. (a) Check basic functions. (1) Check that all ...

    Problem Symptoms Table
    PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are lis ...

    Other materials:

    Toyota CH-R Service Manual > Blower Unit(for Valeo Made): Disassembly
    DISASSEMBLY PROCEDURE 1. PRECAUTION NOTICE: Make sure to perform initialization after replacing the No. 1 blower damper servo sub-assembly. If initialization is not performed, the air conditioner unit assembly will not perform properly as the air conditioning amplifier assembly will not be ...

    Toyota CH-R Service Manual > Forced Release(for Tmmt Made): Operation Method
    OPERATION METHOD PROCEDURE 1. PRECAUTION Click here 2. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY Click here 3. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP LH Click here 4. DISCONNECT REAR DOOR OPENING TRIM WEATHERSTRIP RH HINT: Use the same procedure as for the LH side. ...

    Toyota C-HR (AX20) 2023-2025 Owner's Manual

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2025 Copyright www.tochr.net
    0.0136