Toyota CH-R Service Manual: Problem Symptoms Table

HINT:

• Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
• Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Operation Check

OPERATION CHECK CHECK WINDSHIELD DEICER SYSTEM NOTICE: If the battery voltage becomes low, windshield deicer operation is canceled to prioritize supplying power to the power steering system. Cli ...

Terminals Of Ecu

TERMINALS OF ECU CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (for TMMT Made) (a) Disconnect the F72 air conditioning amplifier assembly connector. (b) Measure the voltage and resistance according t ...

Other materials:

Toyota CH-R Service Manual > Automatic High Beam System: Automatic High Beam Switch Circuit
DESCRIPTION The main body ECU (multiplex network body ECU) detects auto high beam switch signals. The automatic high beam system can be turned on and off by operating the integration control and panel assembly (automatic high beam switch). WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Be ...

Toyota CH-R Service Manual > Can Communication System: Check Bus 2 Line for Short to +B
DESCRIPTION There may be a short circuit between one of the CAN bus lines and +B when no resistance exists between terminal 18 (CA4H) of the central gateway ECU (network gateway ECU) and terminal 16 (BAT) of the DLC3, or terminal 17 (CA4L) of the central gateway ECU (network gateway ECU) and ...