Toyota CH-R Service Manual: Diagnostic Trouble Code Chart

Data List / Active Test

DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when decidi ...

Light Sensor Circuit Malfunction (B1244)

DESCRIPTION The automatic light control sensor detects ambient light. The sensor creates an electrical signal based on the amount of light detected, and sends the signal to the main body ECU (mul ...

Other materials:

Toyota CH-R Service Manual > Safety Connect System: Initialization
INITIALIZATION RESET BACK-UP BATTERY CONDITION HINT: If the back-up battery has been replaced, it is necessary to perform the Reset Backup Battery Condition procedure. (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the follo ...

Toyota CH-R Owners Manual > Steps to take in an emergency: If a warning light turns on or a warning buzzer sounds
Calmly perform the following actions if any of the warning lights comes on or flashes. If a light comes on or flashes, but then goes off, this does not necessarily indicate a malfunction in the system. However, if this continues to occur, have the vehicle inspected by your Toyota dealer. Warn ...