SYSTEM DESCRIPTION
AUTOMATIC LIGHT CONTROL SYSTEM
(a) When the light control switch is in the AUTO position, the automatic light control system detects ambient light levels and controls the low beam headlights, clearance lights, taillights and license plate lights.
LIGHT AUTO TURN-OFF SYSTEM (w/o Toyota Safety Sense P)
(a) The light auto turn-off system is used to prevent the exterior lights from being accidentally left on (headlights, front fog lights*1, taillights, clearance lights and license plate lights).
(b) When all of the following conditions are met, the headlights, front fog lights*1, taillights, clearance lights and license plate lights turn off:
LIGHT AUTO TURN-OFF SYSTEM (w/ Toyota Safety Sense P)
(a) The light auto turn-off system is used to prevent the exterior lights from being accidentally left on (headlights, front side marker lights, parking lights, taillights, rear side marker lights, license plate lights).
|
Function |
Outline |
|---|---|
|
Delay Function |
The exterior lights automatically turn off after 30 seconds when all of the following conditions are met:
|
|
Door Control Transmitter-linked Function |
The exterior lights turn off immediately when the delay function is active and the following condition is met:
|
|
Door Open-linked |
The exterior lights automatically turn off immediately when all of the following conditions are met:
|
DAYTIME RUNNING LIGHT SYSTEM
(a) The daytime running light system is designed to automatically illuminate the daytime running lights during the daytime to make the vehicle more visible to other vehicles.
DOOR MIRROR FOOT LIGHT CONTROL (w/ Door Mirror Foot Light)
(a) General
(b) The door mirror foot light control has the following control functions:
|
Function |
Outline |
|---|---|
|
Actuation Area-linked |
When all of the following conditions are met, the lights that operate fade-in:
|
|
When the following condition is met, the lights that operate fade-out:
|
|
|
Door Lock/Unlock-linked |
When all of the following conditions are met, the lights that operate fade-in:
|
|
When either of the following conditions is met, the lights that operate fade-out:
|
|
|
Ignition Switch-linked |
When the following condition is met, the lights that operate fade-out:
|
|
Delay |
When approximately 15 seconds elapse after any of the following conditions are met, the lights that operate fade-out: The door unlock-linked function is active. |
FOLLOW ME HOME SYSTEM (w/o Toyota Safety Sense P)
(a) The follow me home system is designed to illuminate the low beam headlights for approximately 30 seconds after the vehicle is parked.
(1) This system is controlled by the main body ECU (multiplex network body ECU).
(2) This system is enabled when the following conditions are met:
LANE CHANGE FLASHER CONTROL
(a) This control is performed by the combination meter assembly.
(b) When the headlight dimmer switch assembly (turn signal switch) is moved to the lane change position (it is not necessary to hold the switch) during a lane change, the turn signal light flashes a specified number of times.
(c) While the turn signal light is flashing after the headlight dimmer switch assembly (turn signal switch) has been moved to the lane change position, the turn signal light turns off if the headlight dimmer switch assembly (turn signal switch) is moved in the opposite direction.
How To Proceed With Troubleshooting
Operation CheckToyota CH-R Service Manual > Audio And Visual System(for Radio And Display Type): Dtc Check / Clear
DTC CHECK / CLEAR
CHECK DTC (CHECK USING Techstream)
(a) Connect the Techstream to the DLC3.
(b) Turn the ignition switch to ON.
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Navigation System / Trouble
Codes.
Body Electrical > Navigation System > Trouble ...
Toyota CH-R Service Manual > Brake Master Cylinder: Components
COMPONENTS
ILLUSTRATION
*1
COWL BODY MOUNTING REINFORCEMENT LH
*2
COWL BODY MOUNTING REINFORCEMENT RH
*3
NO. 1 HEATER AIR DUCT SPLASH SHIELD SEAL
*4
OUTER COWL TOP PANEL SUB-ASSEMBLY
*5 ...