Toyota CH-R Service Manual: Disassembly

DISASSEMBLY

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE HEADLIGHT PROTECTOR

(a) Remove the headlight protector.

2. REMOVE HEADLIGHT ECU SUB-ASSEMBLY

Click here

    Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during ...

    Adjustment
    ADJUSTMENT PROCEDURE 1. PREPARE VEHICLE FOR HEADLIGHT AIM ADJUSTMENT (a) Prepare the vehicle: Ensure that there is no damage or deformation to the vehicle body around the headlights. ...

    Other materials:

    Toyota CH-R Service Manual > Airbag System: Side Airbag Sensor Assembly No.2 Lost Communication (RH) (B162B/85,B162C/85)
    DESCRIPTION The side collision sensor RH circuit (bus 2) consists of the airbag sensor assembly and floor side airbag sensor RH. The floor side airbag sensor RH detects impacts to the vehicle and sends signals to the airbag sensor assembly to determine if the airbags and pretensioners should ...

    Toyota CH-R Service Manual > Occupant Classification System: Dtc Check / Clear
    DTC CHECK / CLEAR DTC CHECK (a) Turn the ignition switch off. (b) Connect the Techstream to the DLC3. (c) Turn the ignition switch to ON, and wait for at least 10 seconds. (d) Turn the Techstream on. (e) Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes. Body E ...

    © 2017-2020 Copyright www.tochr.net
    0.0169