Toyota CH-R Service Manual: Removal

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE FRONT BUMPER ASSEMBLY

Click here

2. REMOVE FOG LIGHT ASSEMBLY

(a) Remove the 2 screws.

(b) Disengage the guide to remove the fog light assembly.

    Components
    COMPONENTS ILLUSTRATION *1 FOG LIGHT ASSEMBLY *2 FOG LIGHT BULB ...

    Disassembly
    DISASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for the LH and RH sides. The procedure described below is for the LH side. PROCEDURE 1. REMOVE FOG LIGHT BULB ...

    Other materials:

    Toyota CH-R Service Manual > Blind Spot Monitor System: Blind Spot Monitor Master Module Beam Axis Inspection Incomplete (C1ABB)
    DESCRIPTION This DTC is stored when a beam axis adjustment has not been performed for the blind spot monitor sensor LH (Master). HINT: This DTC is always stored after replacing a blind spot monitor sensor. The purpose of this DTC is to ensure that a beam axis adjustment is performed. Completi ...

    Toyota CH-R Service Manual > Smart Key System(for Start Function): Steering Lock Position Signal Circuit Malfunction (B2285)
    DESCRIPTION This DTC is stored when the steering lock position signal sent by the steering lock ECU (steering lock actuator or upper bracket assembly) via direct line and the steering lock position signal sent via LIN communication do not match. DTC No. Detection Item ...

    © 2017-2020 Copyright www.tochr.net
    0.0146