Components
COMPONENTS
ILLUSTRATION
*1 |
OUTER MIRROR |
*2 |
OUTER MIRROR LIGHT ASSEMBLY |
*3 |
OUTER MIRROR HOLE COVER |
- |
- |
Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL OUTER MIRROR LIGHT ASSEMBLY
(a) Connect the connector to install the outer mirror light assembly.
(b) Engage the grommet.
(c) Engage the claws to install the outer mirror hole cover. |
|
(d) Engage the claws to install the outer mirror hole cover with the outer mirror light assembly. |
|
2. INSTALL OUTER MIRROR
Click here
Removal
REMOVAL
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. REMOVE OUTER MIRROR
Click here
2. REMOVE OUTER MIRROR LIGHT ASSEMBLY
(a) Disengage the claws to remove the outer mirror hole cover with the outer mirror light assembly. |
|
(b) Disengage the claws to remove the outer mirror hole cover. |
|
(c) Disengage the grommet. |
|
(d) Disconnect the connector to remove the outer mirror light assembly.
Toyota CH-R Service Manual > Can Communication System: Check Bus 2 Line for Short to GND
DESCRIPTION
There may be a short circuit between one of the CAN bus lines and GND when there
is no resistance between terminal 18 (CA4H) of the central gateway ECU (network
gateway ECU) and terminal 4 (CG) of the DLC3, or terminal 17 (CA4L) of the central
gateway ECU (network gateway ECU) and ...
Toyota CH-R Service Manual > Continuously Variable Transaxle System: Torque Converter Clutch Solenoid Circuit Low (P2769,P2770)
DESCRIPTION
Based on the signal received by the shift solenoid valve SL, the ECM uses the
shift solenoid valve SLU to control the lock-up clutch pressure.
If there is an open or short in the shift solenoid valve SL circuit, the ECM
stops sending current to the defective shift solenoid valve.
...