Toyota CH-R Service Manual: Diagnostic Trouble Code Chart

Data List / Active Test

DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when decidi ...

Height Control Sensor Data Out of Range When Initializing (B2452)

DESCRIPTION The headlight ECU sub-assembly LH stores this DTC if the sensor value received from the rear height control sensor sub-assembly LH is out of range when performing initialization of th ...

Other materials:

Toyota CH-R Service Manual > Front Seat Inner Belt Assembly: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during the front seat inner belt assembly removal/installation are shown below. Necessary Procedure Aft ...

Toyota CH-R Service Manual > Compressor(for Denso Made): Installation
INSTALLATION PROCEDURE 1. ADJUST COMPRESSOR OIL (a) When replacing the compressor with pulley assembly with a new one, gradually discharge the refrigerant gas from the service valve. Then drain the following amount of oil from the new compressor with pulley assembly before ...