PRECAUTION
IGNITION SWITCH EXPRESSION
HINT:
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
|
Expression |
Ignition Switch (Position) |
Engine Switch (Condition) |
|---|---|---|
|
Ignition Switch off |
LOCK |
Off (LOCK) |
|
Ignition Switch ON |
ON |
On (IG) |
|
Ignition Switch ACC |
ACC |
On (ACC) |
|
Engine Start |
START |
Start |
Horn System
Parts LocationToyota CH-R Service Manual > Pre-collision System: Utility
UTILITY
NOTICE:
When replacing a millimeter wave radar sensor assembly, replace it with a new
one.
If the millimeter wave radar sensor assembly has been replaced or removed/installed,
be sure to perform Front Beam Axis Adjustment. If not performed, DTC C1A14 will
be stored when the system i ...
Toyota CH-R Service Manual > Navigation System: Vehicle Speed Signal Circuit between Navigation ECU and Combination Meter
DESCRIPTION
The navigation ECU receives a vehicle speed signal from the combination meter
assembly.
HINT:
A voltage of 12 V or 5 V is output from each ECU and then input to the
combination meter assembly. The signal is changed to a pulse signal at the
transistor in the combinati ...