Toyota CH-R Service Manual: Rear Wheel House Plate

Components

COMPONENTS

ILLUSTRATION

*1

REAR WHEEL HOUSE FRONT PLATE

-

-

Installation

INSTALLATION

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. INSTALL REAR WHEEL HOUSE FRONT PLATE

(a) Install the rear wheel house front plate with the 3 screws.

Removal

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE REAR WHEEL HOUSE FRONT PLATE

(a) Remove the 3 screws and rear wheel house front plate.

    Installation
    INSTALLATION PROCEDURE 1. INSTALL REAR SPOILER ASSEMBLY (a) Engage the clips to install the rear spoiler assembly as shown in the illustration. Install in this Direction ...

    Rocker Panel Moulding
    ...

    Other materials:

    Toyota CH-R Owners Manual > Steps to take in an emergency: If the vehicle battery is discharged
    The following procedures may be used to start the engine if the vehicle's battery is discharged. You can also call your Toyota dealer or a qualified repair shop. If you have a set of jumper (or booster) cables and a second vehicle with a 12-volt battery, you can jump start your vehicle b ...

    Toyota CH-R Service Manual > Front Passenger Airbag Assembly: Installation
    INSTALLATION PROCEDURE 1. INSTALL NO. 2 INSTRUMENT PANEL WIRE (a) for Single Type: (1) Connect the airbag connector of the No. 2 instrument panel wire to the instrument panel passenger airbag assembly. NOTICE: When connecting any airbag connector, take care not to damage t ...

    © 2017-2021 Copyright www.tochr.net
    0.015