Toyota CH-R Service Manual: Operation Check

Toyota CH-R Service Manual / Tire Pressure Monitoring / Tire Pressure Warning System / Operation Check

OPERATION CHECK

CHECK TIRE PRESSURE WARNING SYSTEM FUNCTION

(a) Using the Data List, check that the current tire pressure is normal.

Click here

(1) Slowly reduce the tire pressure of the front or rear tires and check that the tire pressure on the Data List changes.

(2) Further reduce the tire pressure and check that the warning light illuminates.

(b) After reducing the tire pressure, set the tire pressure to the specified value.

Click here

    How To Proceed With Troubleshooting
    CAUTION / NOTICE / HINT HINT: Use the following procedure to troubleshoot the tire pressure warning system. Make sure that the wireless door lock control system has exited diagnostic ...

    Registration
    REGISTRATION PROCEDURE 1. BEFORE REGISTRATION NOTICE: The transmitter ID is written on the tire pressure warning valve and transmitter. It is not possible to read the transmitter ID after instal ...

    Other materials:

    Toyota CH-R Service Manual > Spiral Cable: Installation
    INSTALLATION PROCEDURE 1. INSPECT SPIRAL CABLE SUB-ASSEMBLY (w/o Steering Heater) NOTICE: If the steering sensor is installed to a misaligned spiral cable sub-assembly, DTCs for an abnormal steering sensor value such as DTC B1801, C1231 and C1433 will be stored and it will be impossible to c ...

    Toyota CH-R Service Manual > Can Communication System: Blind Spot Monitor Sensor Communication Stop Mode
    DESCRIPTION Detection Item Symptom Trouble Area Blind Spot Monitor Sensor Communication Stop Mode Any of the following conditions are met: Communication stop for "Blind Spot Monitor Master" is indicated on th ...

    Toyota C-HR (AX20) 2023-2026 Owner's Manual

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2026 Copyright www.tochr.net
    0.0122