Toyota CH-R Service Manual: Diagnosis System

DIAGNOSIS SYSTEM

DLC3 (Data Link Connector 3)

(a) Check the DLC3.

Click here

BATTERY VOLTAGE

Standard Voltage:

11 to 14 V

If the voltage is below 11 V, replace or recharge the battery.

    Terminals Of Ecm
    TERMINALS OF ECM CHECK ECM HINT: The standard normal voltage between each pair of ECM terminals is shown in the table below. The appropriate conditions for checking each pair of terminals are ...

    Dtc Check / Clear
    DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Powertrain / Engine and ECT / Tr ...

    Other materials:

    Toyota CH-R Service Manual > Steering Pad: Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the horn button assembly removal/installation are shown below. Necessary Procedure After Parts Remo ...

    Toyota CH-R Service Manual > Airbag System: Lost communication with Side Airbag Sensor LH (B1627/82,B1628/82,B1637/82,B1638/82,B1647/82,B1648/82,B167B/82,B167C/82)
    DESCRIPTION The side collision sensor LH circuit (bus 1) consists of the airbag sensor assembly, door side airbag sensor LH, No. 1 side airbag sensor LH and No. 2 side airbag sensor LH. The door side airbag sensor LH, No. 1 side airbag sensor LH and No. 2 side airbag sensor LH detect impacts ...

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2024 Copyright www.tochr.net
    0.0118