Toyota CH-R Service Manual: Drive Shaft System

Problem Symptoms Table

PROBLEM SYMPTOMS TABLE

HINT:

Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

Symptom

Suspected Area

Link

Front wheel shimmy

Front drive shaft (worn)

    Drive Shaft / Propeller Shaft
    ...

    Front Drive Shaft Assembly
    ...

    Other materials:

    Toyota CH-R Service Manual > Blind Spot Monitor System: Yaw Rate Sensor (C1A46)
    DESCRIPTION The blind spot monitor sensor receives yaw rate signals from the airbag sensor assembly via CAN communication. DTC No. Detection Item DTC Detection Condition Trouble Area C1A46 Yaw Rate Sensor A fail f ...

    Toyota CH-R Service Manual > Automatic High Beam System: Dtc Check / Clear
    DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the ignition switch to ON. (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Main Body / Trouble Codes. Body Electrical > Main Body > Trouble Codes (e) Check for DTCs. CLEAR DTC (a) ...

    Toyota CH-R Owners Manual

    Toyota CH-R Service Manual

    © 2017-2024 Copyright www.tochr.net
    0.0085