Toyota CH-R Service Manual: Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART

ELECTRIC PARKING BRAKE SYSTEM

DTC No.

Detection Item

Memory

Note

Link

C13A5

Electric Current of Motor

DTC stored

An electric parking brake system malfunction is displayed on the multi-information display.

C13A6

Open or Short Circuit in Motor

DTC stored

An electric parking brake system malfunction is displayed on the multi-information display.

C13A7

Actuator Malfunction

DTC stored

An electric parking brake system malfunction is displayed on the multi-information display.

C13AA

EPB High Temperature

DTC stored

A warning is displayed on the multi-information display indicating electric parking brake system operation is stopped due to high temperatures.

C13B0

Electric Parking Brake ECU Malfunction

DTC stored

An electric parking brake system malfunction is displayed on the multi-information display.

C13B4

EPB Switch Malfunction

DTC stored

An electric parking brake system malfunction is displayed on the multi-information display.

    Data List / Active Test
    DATA LIST / ACTIVE TEST READ DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any ...

    EPB High Temperature (C13AA)
    DESCRIPTION If the electric parking brake is used continuously, system operation is stopped to prevent the parking brake actuator assembly from overheating. This DTC is stored when system operatio ...

    Other materials:

    Toyota CH-R Service Manual > Vehicle Stability Control System: Skid Control ECU Malfunction (C1300)
    DESCRIPTION The skid control ECU (brake actuator assembly) stores this DTC if malfunctions are found in a circuit inside the ECU by self diagnosis. DTC No. Detection Item DTC Detection Condition Trouble Area C1300 Skid Contr ...

    Toyota CH-R Service Manual > Occupant Classification Ecu: On-vehicle Inspection
    ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: Be sure to correctly follow the removal and installation procedures for the occupant detection ECU. PROCEDURE 1. INSPECT OCCUPANT DETECTION ECU (for Vehicle not Involved in Collision) (a) Perform a diagnostic system check. Click here ...

    © 2017-2020 Copyright www.tochr.net
    0.0311