CAUTION / NOTICE / HINT
HINT:
Even if the portable player can play audio content, it may not be able to play via the in-vehicle device. This does not necessarily indicate a malfunction of the in-vehicle device.
PROCEDURE
|
1. |
CHECK OPERATION |
(a) Check if the portable player operates normally.
OK:
The portable player operates normally.
| NG | |
MALFUNCTION IN PORTABLE PLAYER |
|
|
2. |
CHECK AUDIO SETTINGS |
(a) Set volume, fader and balance to the initial values and check that the sound is normal.
OK:
Audio system returns to normal.
HINT:
Sound quality adjustment measures vary according to the type of amplifier.
| NG | |
REPLACE RADIO RECEIVER ASSEMBLY |
|
|
3. |
CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL |
(a) Check if the "Bluetooth" audio player plays normally on another "Bluetooth" audio compatible vehicle of the same model.
OK:
"Bluetooth" audio player plays normally.
| OK | |
PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
| NG | |
MALFUNCTION IN PORTABLE PLAYER |
Sound of Portable Player cannot be Heard from Speakers or Sound is Low
Portable Player cannot be Operated Using In-vehicle Device or Track Information
is not Displayed on In-vehicle DeviceToyota CH-R Service Manual > Compressor(for Denso Made): Installation
INSTALLATION
PROCEDURE
1. ADJUST COMPRESSOR OIL
(a) When replacing the compressor with pulley assembly with a new one,
gradually discharge the refrigerant gas from the service valve. Then drain
the following amount of oil from the new compressor with pulley assembly
before ...
Toyota CH-R Service Manual > Safety Connect System: Ignition Switch Signal Malfunction (B15C6)
DESCRIPTION
If vehicle movement (10 km/h (6 mph) or more for 10 seconds) is detected based
on the location data sent from the radio receiver assembly even when the telematics
transceiver detects that the ignition switch is off, this DTC will be stored.
DTC No.
Detection I ...