Toyota CH-R Service Manual: Dtc Check / Clear

DTC CHECK / CLEAR

CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Pre-Collision 2 / Trouble Codes.

(e) Check for DTCs.

Click here

Body Electrical > Pre-Collision 2 > Trouble Codes

CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the ignition switch to ON.

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / Pre-Collision 2 / Clear DTCs.

(e) Clear the DTCs.

Body Electrical > Pre-Collision 2 > Clear DTCs
    Diagnosis System
    DIAGNOSIS SYSTEM CHECK DLC3 (a) Check the DLC3. Click here FUNCTION OF WARNING INDICATOR AND MESSAGE (a) If the pre-collision system is not functioning properly, the driver is warned by the P ...

    Freeze Frame Data
    FREEZE FRAME DATA DESCRIPTION (a) When a pre-collision system DTC is stored, the millimeter wave radar sensor assembly stores the current vehicle (ECU or sensor) state as Freeze Frame Data. CHECK ...

    Other materials:

    Toyota CH-R Service Manual > Power Steering System: Precaution
    PRECAUTION IGNITION SWITCH EXPRESSION HINT: The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section. Expression Ignition Switch (Position) Engine S ...

    Toyota CH-R Service Manual > Key Reminder Warning System: System Diagram
    SYSTEM DIAGRAM Key Reminder Warning System Communication Table Sender Receiver Signal Line Main Body ECU (Multiplex Network Body ECU) Combination Meter Assembly Driver door courtesy light switch signal ...

    © 2017-2019 Copyright www.tochr.net
    0.0152