DISASSEMBLY
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. REMOVE REAR DOOR UPPER OUTSIDE MOULDING PAD
|
(a) Remove the rear door upper outside moulding pad. |
|
2. REMOVE NO. 2 OUTSIDE MOULDING RETAINER
|
(a) Remove the No. 2 outside moulding retainer. |
|
Removal
ReassemblyToyota CH-R Service Manual > Front Seat Outer Belt Assembly: Installation
INSTALLATION
CAUTION / NOTICE / HINT
HINT:
Use the same procedure for the RH side and LH side.
The procedure listed below is for the LH side.
PROCEDURE
1. INSTALL FRONT SHOULDER BELT ANCHOR ADJUSTER ASSEMBLY
(a) Engage the guide and temporarily install the front sh ...
Toyota CH-R Service Manual > Air Conditioning System(for Automatic Air Conditioning System With Top-mounted
Air Conditioner Pressure Sensor): Open in Ion Generator Circuit (B14B9)
DESCRIPTION
The ion generator sub-assembly operates when both the ion generator switch and
the blower switch are on. The air conditioning amplifier assembly sends a drive
signal to the ion generator sub-assembly. When the ion generator sub-assembly receives
the drive signal and starts to oper ...