Toyota CH-R Service Manual: Fail-safe Chart

Dtc Check / Clear

DTC CHECK / CLEAR CHECK DTC (for TIRE PRESSURE WARNING ECU AND RECEIVER) (USING Techstream) (a) Turn the ignition switch off. (b) Connect the Techstream to the DLC3. (c) Turn the ignition switch t ...

Data List / Active Test

DATA LIST / ACTIVE TEST READ DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any ...

Other materials:

Toyota CH-R Service Manual > Blind Spot Monitor System: Slave Module Horizontal Axis Misalignment (C1AC2)
DESCRIPTION This DTC is stored when the angle of the blind spot monitor sensor RH (Slave) deviates more than the allowable range from the horizontal axis. HINT: If a drum tester such as a speedometer tester, brake/speedometer combination tester or chassis dynamometer is used with th ...

Toyota CH-R Service Manual > Front Door Courtesy Switch: Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the LH and RH sides. The procedure described below is for the LH side. PROCEDURE 1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY (a) Using a T30 "TORX" socket wrench, install the front door c ...