Adjustment procedure
1. Hold the steering wheel and push the lever down.
2. Adjust to the ideal position by moving the steering wheel horizontally and vertically.
After adjustment, pull the lever up to secure the steering wheel.
Horn
To sound the horn, press on or close to the
mark.
■After adjusting the steering wheel Make sure that the steering wheel is securely locked.
The horn may not sound if the steering wheel is not securely locked.
■Caution while driving Do not adjust the steering wheel while driving.
Doing so may cause the driver to mishandle the vehicle and cause an accident, resulting in death or serious injury.
■After adjusting the steering wheel Make sure that the steering wheel is securely locked.
Otherwise, the steering wheel may move suddenly, possibly causing an accident, resulting in death or serious injury. Also, the horn may not sound if the steering wheel is not securely locked.
Toyota CH-R Service Manual > Continuously Variable Transaxle System: Acceleration Sensor Learning Value (P1589)
DESCRIPTION
The ECM stores DTC P1589 if deceleration sensor zero point calibration is not
performed or failed after system components such as the ECM are replaced.
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
MIL
Me ...
Toyota CH-R Service Manual > Rear Seat Inner Belt Assembly(for Lh Side): Installation
INSTALLATION
PROCEDURE
1. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH
(a) w/o Seat Belt Warning System:
(1) Tighten the bolt and install the rear seat inner with center belt
assembly LH.
Torque:
42 N·m {428 kgf·cm, 31 ft·lbf}
NOTICE:
Do not allow the ancho ...