KIA Niro: Emergency Stop Signal (ESS)

The Emergency Stop Signal (ESS) alerts the driver behind by flashing the brake lights when braking sharply and severely.

Operating condition(s)

  • The vehicle suddenly stops.
  • ABS is activated and the driving speed is over 55 km/h (34 mph).
  • The hazard warning flasher automatically turns ON after blinking the brake lights when:
  • The driving speed is under 40 km/h (25 mph)
  • The ABS is deactivated
  • The sudden braking is over
  • The hazard warning flasher turns OFF when:
  • The vehicle drives at a low speed for a certain period of time.

NOTICE

The Emergency Stop Signal (ESS) system will not activate, when the hazard warning flashers are already on.

Brake Assist System (BAS)

The Brake Assistant System provides additional pressure when the brake pedal is momentarily and strongly depressed in a situation sudden braking is required while driving.

The Brake Assistant System reduces the time for ABS(Anti-Lock Brake System) control to enter and consequently reduces the braking distance, by providing additional pressure up to the point of ABS intervention.

BAS operation

  • When the vehicle speed is more than 30 km/h and the ABS control is not entered.
  • When the brake pedal is depressed slightly under a certain level.
  • When the friction of the road surface is above a certain level.

BAS operation off

  • The vehicle speed is below 10 km/h.
  • The brake pedal is depressed over a certain conditions.
  • The friction of the road surface is below a certain level.

WARNING

The system may not operate depending on driver's driving habit, the degree to which the brake pedal is depressed and the road surface condition.

NOTICE- (Kia Niro Hybrid only)

  • The sensing range and objects detectable by the sensors are limited. Pay attention to the road conditions at all times.
  • NEVER drive too fast in accordance with the road conditions or while cornering.
  • Always drive cautiously to prevent unexpected and sudden situations from occurring. BAS does not stop the vehicle completely and does not avoid collisions.

    READ NEXT:

     Drive mode integrated control system

    DRIVE MODE Selecting DRIVE MODE Operation Press the DRIVE MODE button. Press and hold DRIVE MODE button to change to SNOW mode. DRIVE MODE will change to NORMAL mode when the vehicle is restarted. ECO mode will be maintained whe

     Active air flap

    Active air flap system controls the air flap below the front bumper to cool the vehicle parts and improve energy efficiency. Active air flap malfunction A: Check Active Air Flap System The active air flap system may not operate normally

     Green Zone Drive Mode for Europe (Kia NIRO Hybrid)

    In order to protect the atmospheric environment in urban areas, EV mode is expanded when entering the road inside the green zone based on the navigation information. Also, EV mode is expanded based on the driving history when departing from

    SEE MORE:

     Fuses

    Blade type Cartridge type Multi fuse BFT * Left: Normal, Right: Blown * The actual fuse/relay panel label may differ. Before replacing a blown fuse, disconnect the negative battery cable. If the electrical system does not work,

     Front Wheel Speed Sensor

    Front Wheel Speed Sensor Components and components location Front wheel speed sensor Front wheel speed sensor cable Front Wheel Speed Sensor Repair procedures Removal Remove the tire. Tightening torque: 107.9 - 127.5 N*m (11.0 -