Toyota CH-R Service Manual: Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE POWER MIRROR CONTROL SYSTEM

HINT:

The following items can be customized.

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Record the current settings before customizing.

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the ignition switch to ON.

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Others.

(5) Select the setting by referring to the table below.

Others

Tester Display

Description

Default

Setting

ECU

Auto Fold Mirror

Function that changes the condition under which the outer mirrors automatically retract*

Door Lock

01:ACC,10:Door Lock,11:OFF

Main body ECU (Multiplex network body ECU)

  • *: w/ Retract Mirror
    Operation Check
    OPERATION CHECK CHECK ELECTRICAL REMOTE CONTROL MIRROR FUNCTION (a) Turn the ignition switch to ON. (b) With L on the mirror select switch selected, check that the outer rear view mirror assembly ...

    Problem Symptoms Table
    PROBLEM SYMPTOMS TABLE NOTICE: If the battery voltage is low, the mirror heater function may not operate. In this case, check the Data List item "Battery Control Count (Body ECU)". Clic ...

    Other materials:

    Toyota CH-R Service Manual > Continuously Variable Transaxle System: Output Speed Sensor Circuit No Signal (P0722,P077C,P077D)
    DESCRIPTION The ECM receives a signal from the transmission revolution sensor (NOUT) installed in the continuously variable transaxle and determines the output shaft (secondary pulley) speed in order to control the gear ratio. The transmission revolution sensor (NOUT) detects the continuously ...

    Toyota CH-R Service Manual > Washer Motor: Components
    COMPONENTS ILLUSTRATION *1 FRONT FENDER LINER RH *2 FRONT WHEEL OPENING EXTENSION PAD RH *3 WINDSHIELD WASHER MOTOR AND PUMP ASSEMBLY - - ...

    © 2017-2020 Copyright www.tochr.net
    0.0157