Toyota CH-R Service Manual: Rear Suspension System

Installation

INSTALLATION PROCEDURE 1. INSTALL HOLE PLUG (a) Install the 7 hole plugs to the rear suspension member sub-assembly as shown in the illustration. 2. INSTALL REAR SUSPENSION MEMBER HOLE COVER (a ...

Problem Symptoms Table

PROBLEM SYMPTOMS TABLE HINT: Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order ...

Other materials:

Toyota CH-R Service Manual > Rear Combination Light Assembly(for Bulb Type): Installation
INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL REAR COMBINATION LIGHT ASSEMBLY (a) Connect the connector. (b) Engage the guide, pin and clip to temporarily instal ...

Toyota CH-R Service Manual > Vehicle Stability Control System: Yaw Rate Sensor Output Value (C1448)
DESCRIPTION The yaw rate and acceleration sensor is built into the airbag sensor assembly. The skid control ECU receives signals from the yaw rate and acceleration sensor (airbag sensor assembly) via CAN communication. The airbag sensor assembly has a built-in yaw rate and acceleration sensor a ...