KIA Niro: Limitations of the system

The Smart Regeneration System may not operate properly in certain situations when the driving condition is beyond the performance of the front radar sensor.

Driver's attention is required in such cases when the system does not react properly or operate unintentionally.

Driving on a curved road

Driving on a curved road

When driving on the curve, the system may not detect the vehicle in your lane and the regenerative braking level will reduce automatically, making you feel that the vehicle is accelerating.

Also, if the system suddenly recognizes the vehicle in front, the regenerative braking level will increase automatically, making you feel that the vehicle is decelerating.

The driver must maintain a safe braking distance, and if necessary, depress the brake pedal to reduce your driving speed in order to maintain a safe distance.

Driving on a curved road

The smart regeneration system may recognize a vehicle in an adjacent lane when driving on a curved road. In this case, the system increase the braking level and slow the vehicle.

Always pay attention to road and driving conditions while driving. If necessary, depress the brake pedal to reduce your driving speed in order to maintain a safe distance. Also, when necessary, you may depress the accelerator pedal to prevent the system from unnecessarily decelerating your vehicle.

Always check the traffic conditions around the vehicle.

Driving on a sloped road

Driving on a sloped road

When driving uphill or downhill, the system may not detect the vehicle in your lane and the regenerative braking level will reduce automatically, making you feel that the vehicle is accelerating.

Also, if the system suddenly recognizes the vehicle in front, the regenerative braking level will increase automatically, making you feel that the vehicle is decelerating.

The driver must maintain a safe braking distance, and if necessary, depress the brake pedal to reduce your driving speed in order to maintain a safe distance.

Changing lanes

Changing lanes

When a vehicle changes lanes in front of you, the smart regeneration system may not immediately detect the vehicle, especially if the vehicle changes lanes abruptly. In this case, you must maintain a safe braking distance, and if necessary, depress the brake pedal to reduce your driving speed in order to maintain a safe distance.

Recognizing the vehicle

Recognizing the vehicle

Some vehicles in your lane cannot be recognized by the sensor:

  • Narrow vehicles such as motorcycles or bicycles
  • Vehicles offset to one side
  • Slow-moving vehicles or suddendecelerating vehicles
  • Stopped vehicles (When the vehicle ahead drives away, the system may not detect a stopped vehicle.)
  • Vehicles with small rear profile such as trailers with no loads

A vehicle ahead cannot be recognized correctly by the sensor if any of following occurs:

  • When the vehicle is pointing upwards due to overloading in the luggage compartment
  • While the steering wheel is operating
  • When driving to one side of the lane
  • When driving on narrow lanes or on curves

Apply the brake or accelerator pedal if necessary.

WARNING

When using the Smart Regeneration System take the following precautions:

  • If an emergency stop is necessary, you must apply the brakes.
  • Keep a safe distance according to road conditions and vehicle speed. If the vehicle distance is too close during high-speed driving, a serious collision may result.
  • Always maintain sufficient braking distance and decelerate your vehicle by applying the brakes if necessary.
  • The Smart Regeneration System is designed to detect and monitor the vehicle ahead in the roadway through radar signals. It is not designed to detect oncoming vehicles, pedestrians, bicycles, motorcycles, or smaller wheeled objects such as luggage bags, shopping carts, or strollers.
  • Vehicles moving in front of you with a frequent lane change may cause a delay in the system's reaction or may cause the system to react to a vehicle actually in an adjacent lane. Always drive cautiously to prevent unexpected and sudden situations from occurring.
  • The Smart Regeneration System may not recognize complex driving situations so always pay attention to driving conditions and control your vehicle speed.

CAUTION- (Kia Niro EV only)

  • Do not apply license plate frame or foreign objects such as a bumper sticker or a bumper guard near the radar sensor. Doing so may adversely affect the sensing performance of the radar.
  • Always keep the radar sensor and lens cover clean and free of dirt and debris.
  • Use only a soft cloth to wash the vehicle.

    Do not spray pressurized water directly on the sensor or sensor cover.

  • Be careful not to apply unnecessary force on the radar sensor or sensor cover. If the sensor is forcibly moved out of proper alignment, the Smart Regeneration System may not operate correctly. In this case, a warning message may not be displayed. Have the vehicle inspected by a professional workshop. Kia recommends visiting an authorized Kia dealer/service partner.
  • If the front bumper becomes damaged in the area around the radar sensor, the Smart Regeneration System may not operate properly. Have the vehicle inspected by a professional workshop. Kia recommends visiting an authorized Kia dealer/service partner.
  • Use only Kia Genuine Parts or those of an equivalent standard to repair or replace a damaged sensor or sensor cover. Do not apply paint to the sensor cover.

NOTICE

The Smart Regeneration System may not operate temporarily due to:

  • Electrical interference
  • Modifying the suspension
  • Differences of tire abrasion or tire pressure
  • Installing different type of tires

    READ NEXT:

     Brake system

     In the event of brake failure (Kia NIRO Hybrid)

    Operation Make an emergency stop with the parking brake. Operating condition(s) The brake has failed WARNING Avoid applying the parking brake to stop the vehicle while it is moving except in an emergency situation. Applying the pa

     In the event of brake failure (Kia Niro EV)

    Operation Make an emergency stop with the parking brake. Operating condition(s) The brake has failed Power-assisted brakes Operation Apply greater force to the brake pedal. Operating condition(s) The vehicle is stalled

    SEE MORE:

     Room Lamp Repair procedures | Vanity Lamp Repair procedures

    Removal Warning Put on gloves to prevent hand injuries. When removing with a flat-tip screwdriver or remover, wrap protective tape around the tools to prevent damage to components. Disconnect the negative (-) battery terminal

     Clutch Actuator Motor

    Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") Remove the front wheel guard (LH). (Refer to Body - "Front Wheel Guard") Disconect the clutch actuator connector (A). Motor