KIA Niro: Infotainment system

Using the infotainment/climate switchable controller

Using the infotainment/climate switchable controller

Press the button on the switchable controller to switch between infotainment system or climate control panel.

Press and hold the button to select the default mode for the control panel.

Switching between panels

Infotainment control panel
Infotainment control panel

Type A
Type A

Type B
Type B

Press the button on the switchable controller to select the desired control panel.

The selected control panel icon will be appeared and the control panel will be changed.

  • The knob display will be appeared according to the selected control panel mode.
  • When the vehicle is in the ACC position, only the infotainment system will be activated.

Setting the default mode

Setting the default mode

Press and hold the button to select the default mode for the control panel.

  • After the setting, the control panel will return to the default mode after a certain period of time even if the control panel is switched to the different mode.
  • If the mode is set to 'OFF', the control panel will display the mode used recently.

    READ NEXT:

     Audio system

     Antenna/  USB port

    Antenna Shark-fin Antenna The shark-fin antenna transmits and receives wireless signals such as AM/FM, DAB, GNSS, LTE etc. * The signals which antenna can transmit and receive vary by the vehicle option. CAUTION Be careful of

     How vehicle radio works

    FM reception AM and FM radio signals are broadcast from transmitter towers located around your city. They are intercepted by the radio antenna on your vehicle. This signal is then processed by the radio and sent to your vehicle speakers.

    SEE MORE:

     Front Door Trim Repair procedures | Front Door Window Glass

    Front door trim Replacement Remove the front door quadrant inner cover (A) by using a remover. Disconnect the cap (A) after loosening the screw. Remove the front door trim (A). Remove the front door

     Memory Power Seat Switch

    Connector and Terminal Function Memory power seat switch Repair procedures Removal Disconnect the negative (-) battery terminal. Remove the driver front door trim. (Refer to Body - "Front Door Trim") Remove the memory power